Green-fern-leaves-621761(1).jpg

Mounting Bracket

bracket1.png
Green-fern-leaves-621761(1).jpg

Mounting Bracket

Fancy mounting your thermostat to the side of your enclosure?

Heres the soloution!

The mounting bracket will easily fix to the back of the following thermostats..

Dimmer B1, Dimmer B1 HT, Pulse B2, Pulse B2 HT, OLED Dimmer, OLED Pulse, Evo Lite and also the 1st generation EVO (not connected models).

Use the bracket as a template to mark holes on the surface you would like to attach your thermostat too.  Attach suitable fixings to the surface and leave the screws protruding 3 to 5mm.

 

Then using the included hardware attach the bracket to your thermostat.

This will then allow you to hook your thermostat onto the wall or your vivarium.

bracket2_edited.png
bracket fitted.png
Green-fern-leaves-621761(1).jpg
bracket1.png
Green-fern-leaves-621761(1).jpg

1 x Mounting Bracket

2 x Long Screws for use with B Series, OLED and Evo Lite thermostats

2 x Short screws for use with 1st Generation Evo thermostats.

Suitable for Microclimate B Series, OLED, EVO Lite and 1st Generation EVO Thermostats